TEAT | Electrically heated hoses

TYPE WFA

TECHNICAL
SPECIFICATIONS

The electrically heated hose WFA-type is based on a heavy wall PTFE corrugated core externally reinforced with a PTFE impregnated fiberglass with a steel spiral wire and with an high resistance external braid in stainless steel AISI 304. Suitable for heavy duty applications, it has a maximum operating pressure of 100 bar (with Ø 1/2” internal hose). The steel spiral wire ensures a further protection in case of impact or random crushing and the greater thickness of the PTFE increases the resistance of the aspiration. It’s available in the following versions:

T100 for operating temperatures up to 100°C (212°F)
T200 for operating temperatures up to 200°C (392°F)

Nominal diameter of the internal hose from 1/2” to 3”.
Lenght on request without limits.

OPERATING PRESSURE

OPERATING TEMPERATURE / VERSIONS

APPLICATIONS

MOLDING

Transport of polymers on blowing or extrusion machines in the thermoplastic material moulding industry.

GAS AND VAPORS

Transport of corrosive chemicals, transfer of gases and vapors.

TECHNICAL DATA

NOMINAL DIAMETER		MINIMUM INTERNAL DIAMETER	MAXIMUM EXTERNAL DIAMETER	MINIMUM BEND RADIUS	MAXIMUM OPERATING PRESSURE	BURST PRESSURE AT ROOM TEMPERATURE
1/2”	13 mm	9.5 mm	18 mm	54 mm	100 bar	400 bar
3/4”	19 mm	16 mm	25.4 mm	108 mm	70 bar	280 bar
1”	25 mm	22.2 mm	36.2 mm	180 mm	40 bar	160 bar
1.1/4”	32 mm	28.5 mm	42.8 mm	230 mm	35 bar	140 bar
1.1/2”	38 mm	35 mm	50 mm	300 mm	30 bar	120 bar
2”	50 mm	47.6 mm	62.9 mm	450 mm	27 bar	106 bar
3”	75 mm	73 mm	96.5 mm	1000 mm	13 bar	52 bar

DOWNLOAD BROCHURE

TECHNICALSPECIFICATIONS